Replacing Lamp the Epson PowerLite S7 79 W7 S7 W7 WEX31 EX51 EX71

You can search by Brand ,Model name. e.g. Sony ;XL-2400 ;Dell 2300MP lamp

Replacing the Epson ELPLP54 ultra high efficiency (UHE) projector lamp.The Epson PowerLite life span of the projection lamp is about 4000 hours if Power Consumption in the Settings menu is Normal (default), and 5000 hours if this setting is ECO.
It is time to replace the lamp when:
■ The projected image gets darker or starts to deteriorate.
■ The message Replace the lamp appears on the screen and the
Lamp light flashes orange. To maintain projector brightness
and image quality, replace the lamp as soon as possible.
You may also need to replace the lamp if the Lamp light flashes red.

Replacing-Lamp-the-Epson-PowerLite-S7

Follow these steps to replace the lamp:V13H010L54

  1. Turn off the projector and unplug the power cord.
  2. Let the projector cool for at least an hour (if it has been on). The lamp is extremely hot immediately after use.
  3. Loosen the lamp cover screw (you cannot remove it). Then slide the lamp cover off.
    Replacing-Lamp-the-Epson-PowerLite-S7-projector
  4. Loosen the two screws holding the lamp in place (you can’t remove them).

    Replacing-Lamp-Epson-PowerLite-S7-projector

  5. Hold the lamp as shown and pull it straight out.

    Replacing-Lamp-Epson-PowerLite-S7-projectors

  6. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is
    facing the right way.) Then tighten its screws.

    Replacement-Lamp-the-Epson-PowerLite-S7-projector

  7. Replace the lamp cover, then tighten its screw.

    Epson-PowerLite-S7-projector-replacement-lamp

  8. Reset the lamp timer.

Replacement Lamp S7 79 W7 S7 W7 WEX31 EX51 EX71
Binding: Office Product
Manufacturer: Epson America Inc
Brand: Epson
Model: V13H010L54
Model: V13H010L54
010343874213
30 Days and Manufacturer

Replacing Lamp the Epson PowerLite S7 79 W7 S7 W7 WEX31 EX51 EX71 thumbnail